Leidos ProVision 3 - Page 18

ProVision 3 Installation Manual
8100-35521-00
Rev. A1
Leidos Security Detection & Automation, Inc. – Proprietary Page 18 of 119
© 2020 Leidos. All rights reserved
Quantity
Description
1
1.5mm hex key
1
10mm hex key
1
Hex Bits Set
1
Torque wrench, 3/8" square drive, 30–250 in-lb / 3.4–28.2 Nm
1
Torque wrench, 1/2" drive, 20–150 ft-lb / 27.1–203.4 Nm
1
3/8” impact socket
1
7/16” impact socket
1
9/16” impact socket
Table 2: Required Troubleshooting/Service Tools
Quantity
Description
1
Field service laptop
1
Long-nose electrical pliers
1
Locking pliers 130mm
1
Torque wrench, 5/16"
1
Ratchet, 1/4" drive
1
Screwdriver, slotted, narrow blade, 3mm tip width, 150mm long
Table 3: Optional Tools
Quantity
Description
1
Drill, driver, cordless, 14.4V, heavy duty, 1/2" (13mm) chuck, with charger and two
batteries
1
Square drive socket universal joint, 3/8" drive
1
Adapter, 1/4" hex to 3/8"square drive male, 2" length