Leidos ProVision 3 - Tools List; Tools in Installation Kit; Additional Tools

ProVision 3 Installation Manual
8100-35521-00
Rev. A1
Leidos Security Detection & Automation, Inc. – Proprietary Page 17 of 119
© 2020 Leidos. All rights reserved
3.0 Tools List
3.1 Tools in Installation Kit
Reference the installation kit packing list for the materials included.
3.2 Additional Tools
In addition to the tools included in the installation kit, the following tools are required (Tables 2 and 3) or
optional (Table 3).
Table 1: Required Installation Tools
Quantity
Description
1
Cutter, wire, diagonal, cushion grip, 5-5/8" long
1
Screwdriver, slotted, 3/8" blade, 10.75" long
1
Screwdriver, Phillips, (#2), 8" long
1
Screwdriver, ratcheting, insert bit, 1/4" hex bits
1
Extension, 3/8" drive, 6" overall length
1
Wrench, adjustable, 8"
1
Knife, utility
1
Miniature flashlight
1
Multi-meter (digital recommended)
1
Ratchet, 3/8" drive
1
1/2" to 3/8" drive adapter
1
3/8" to 1/2" drive adapter
1
10mm wrench (reversible ratcheting optional)
1
13mm wrench (reversible ratcheting optional)
1
15mm wrench (reversible ratcheting optional)
1
19mm wrench (reversible ratcheting optional)
1
24mm wrench (reversible ratcheting optional)
1
Socket, square drive, 10mm, standard, 3/8" drive
1
Socket, square drive, 13mm, standard, 3/8" drive
1
Socket, square drive, 15mm, standard, 3/8" drive
1
Socket, square drive, 19mm, standard, 3/8" drive
1
Socket, square drive, 24mm, standard, 3/8" drive
1
Hex key set, 6 Keys, 2mm-6mm