Leidos Security Detection & Automation, Inc. – Proprietary Page 33 of 119
© 2020 Leidos. All rights reserved
14. Roll the assembly forward to the edge of the crate so that the casters align with the two ramps. At a
minimum, two people are required to move the assembly down the ramps. Keep both hands on the
assembly at all times. Move slowly; quick movements can make the assembly uncontrollable.
15. Maintaining a secure hold on the assembly to keep it under control, slowly roll the assembly down the
ramps.
16. Remove the ramps and move the crate base out of the way.
To Next Page
Loading...