5.4008.8573.0 B
5-6 Operating Instructions
The day planning can not control the machine. You can manually control the machine with the Lely
Control Plus app.
When the out of operation mode is switched on, the machine stops immediately when it is moving.
Therefore, the out of operation mode can be used in emergency cases.
There are two ways to put the machine into operation and take it out of operation:
• With the PAUSE button on the machine.
• With the Lely Control Plus application.
5.4.1 Put the Machine into Operation and take it Out of Operation with the Pause
Button
The first time after switching on the machine, you can only put the machine into
operation by means of the Lely Control Plus application.
The pause button is at the front of the machine. The
position of the pause button is marked with a decal.
Make sure that you know the position of the pause
button!
in novators in agriculture