5.4008.8573.0 B
6-10 Maintenance
Clean
Figure 33. Clean the ultrasonic sensors
KEY: 1. Left ultrasonic sensor
1. Clean the ultrasonic sensors on the left and right side of the machine with a moist cloth or soft brush.
Especially the part within the red circle in the picture must be clean.
Test
1. Switch the machine on.
2. Test the ultrasonic sensor (see Test the Ultrasonic Sensors on page 7-1).
Close-up
1. Manually drive and connect the machine to the charger.
2. Unblock the cow traffic.
3. Put the machine into operation.
6.8 Clean the Manure Tank
When a plug of dried material causes trouble and the tank is not emptied completely, the manure tank
must be cleaned manually.
in novators in agriculture
To Next Page
Loading...