5.4008.8573.0 B
Maintenance 6-9
Do not use a pressure cleaner to clean the ultrasonic sensors.
When it is difficult to get the manure off, first make the surface of the ultrasonic sensors
wet with a moist cloth, let the water soak the manure for a while and then wipe it off.
Do not use sharp objects to clean the ultrasonic sensors.
Figure 32. Clean the ultrasonic sensors
Preparation
1. Take the machine out of operation.
2. Manually drive the machine away from the charger to disconnect it.
3. Manually drive the machine to a clean and quiet location with water supply.
4. Block the cow traffic.
5. Switch the machine off.
in novators in agriculture