5.4008.8573.0 B
Operating Instructions 5-15
The machine will not leave the water station automatically after completing the filling.
Any following actions must be controlled manually.
5.5.3.5 Manually start a Route
Moving machine
Risk of injury.
Only control the machine remotely when the machine is in your line of sight.
1. Connect the Lely Control Plus app to the machine.
2. Slide the switch
to the left ( ) to take the machine out of operation.
3. Make sure the machine is at the charger in the correct direction before starting a route manually. If it is
not standing at the charger, drive it there or wait for the machine to finish the current route (see Drive
the Machine back to the Charging Station on page 5-12).
4. Tap the menu
Routes.
A list of available routes appears.
5. Tap the button
on the line of the route you want to start.
6. On the next page tap:
1.
Continue dayplanning after route if you do not want that the machine starts its day
planning after this route. The checkmark turns grey (
).
2. to start the route with spraying water.
3.
to start the route without spraying water.
When driving without spraying water, the water fill action is skipped.
7. You can add more routes to be driven before continuing the dayplanning.
in novators in agriculture
To Next Page
Loading...
Need help?
General
