Operation
119
12.5.3.3 Folding-in the SE linkage asymmetrically
This function is only possible for control with convenience folding.
Booms can be folded on both sides in pairs. To this end, the relevant
key needs to be pressed additionally.
In the Folding menu:
- Press the key to select the function fold-in linkage asymmetrically.
The first Fold-in linkage asymmetrically menu now appears.
The linkage can be folded asymmetrically as follows:
Boom 4 - left
Slope compensation
Boom 4 - right
- Press the key to preselect boom 4 - left.
- Press and hold the key, any information is then displayed.
To fold-in boom 4 - left:
- Operate the tractor's corresponding control unit.
- Press the key or another function key to cancel the preselection.
- Press the key to preselect boom 4 - right.
- Press and hold the key, any information is then displayed.
To fold-in boom 4 - right:
- Operate the tractor's corresponding control unit.
- Press the key or another function key to cancel the preselection.
- Press one of the keys to preselect the slope compensation.
To set the slope compensation:
- Operate the tractor's corresponding control unit.
- Press the key to enter the second Fold-in linkage asymmetrically menu.
To Next Page
Loading...