Operation
108
12.5.2 Extending the HE linkage
12.5.2.1 Extending HE linkage - with pendulum lock, with slope compensation
Before the linkage can be extended, the pendulum lock has to be closed:
- Press the key to switch on the terminal.
- Press the key to enter the first Folding menu.
The first Folding menu now appears.
- Press the key to enter the second Folding menu.
The second Folding menu now appears.
- Press one of the keys to preselect the pendulum lock function.
To open or close the pendulum lock:
- Operate the tractor's corresponding control unit.
- Press one of the keys to cancel the preselection.
To enter the first Folding menu again:
- Press the key.
After extending the linkage, the pendulum lock needs to be opened again.
To Next Page
Loading...