LEMKEN Ecospray - D - System Faults

Rectifying faults
136
14.5 D - System faults
Code Description Possible cause Corrective measure
D01 CAN-BUS fault
 Missing terminal plug
 Deficient bus line
 Defective connector job computer
 Defective connector terminal
 Visual inspection
 Replace cable, where necessary
 Replace job computer, where nec-
essary
 Replace terminal, where necessary
D02
LIN-BUS 1 fault (job
computer)
 Deficient bus line
 Defective connector job computer
 Defective connector LIN supplemental
device
 Visual inspection
 Replace cable, where necessary
 Replace connector, where neces-
sary
 Replace supplemental operating
device, where necessary
D03
LIN-BUS 2 fault
(terminal)
 Deficient bus line
 Defective connector terminal
 Defective connector LIN supplemental
device
 Visual inspection
 Replace cable, where necessary
 Replace connector, where neces-
sary
 Replace supplemental operating
device, where necessary
D04
Emergency-stop
chain interrupted
 Missing terminal plug
 Deficient bus line
 Defective connector job computer
 Defective connector terminal
 Visual inspection
 Replace cable, where necessary
 Replace connector, where neces-
sary
D05 Undervoltage fault Wrong or defective voltage supply Check voltage supply
D06 Overvoltage fault Wrong or defective voltage supply Check voltage supply
D07
Job computer tem-
perature fault
Overheating Find cause for high temperature