LEMKEN Ecospray - Folding in the Linkage Symmetrically

Extending and retracting SE linkage
38
9.4.2 Folding in the linkage symmetrically
Before symmetrically folding the linkage, the linkage must be in centre position.
- Press the key to select the fold-in linkage symmetrically function.
The Fold-in linkage symmetrically menu now appears.
The linkage can be extended symmetrically as follows:
 Boom 1
 Booms 2 + 3
 Boom 4
- Press the key to preselect boom 1.
- Press and hold the key, any information is then displayed.
To fold-in boom 1:
- Operate the tractor's corresponding control unit.
- Press the key or another function key to cancel the preselection.
- Press the key to preselect booms 2 and 3.
To fold-in booms 2 and 3:
- Operate the tractor's corresponding control unit.
- Press the key or another function key to cancel the preselection.
- Press the key to preselect boom 4.
- Press and hold the key, any information is then displayed.
To fold-in boom 4:
- Operate the tractor's corresponding control unit.
- Press the key or another function key to cancel the preselection.