LEMKEN Ecospray - Fold the Linkage Asymmetrically

Extending and retracting SE linkage
39
9.4.3 Fold the linkage asymmetrically
 This function is only possible for control with convenience folding.
 Booms can be folded on both sides in pairs. To this end, the relevant
key needs to be pressed additionally.
In the Folding menu:
- Press the key to select the function fold-in linkage asymmetrically.
The first Fold-in linkage asymmetrically menu now appears.
The linkage can be folded asymmetrically as follows:
 Boom 4 - left
 Slope compensation
 Boom 4 - right
- Press the key to preselect boom 4 - left.
- Press and hold the key, any information is then displayed.
To fold-in boom 4 - left:
- Operate the tractor's corresponding control unit.
- Press the key or another function key to cancel the preselection.
- Press the key to preselect boom 4 - right.
- Press and hold the key, any information is then displayed.
To fold-in boom 4 - right:
- Operate the tractor's corresponding control unit.
- Press the key or another function key to cancel the preselection.
- Press one of the keys to preselect the slope compensation.
To set the slope compensation:
- Operate the tractor's corresponding control unit.
- Press the key to enter the second Fold-in linkage asymmetrically menu.