Extending and retracting SE linkage
32
The second Extend linkage asymmetrically menu now appears.
The following linkage functions can now be controlled:
Booms 2 + 3 – left
Slope compensation
Booms 2 + 3 - right
- Press the key to preselect booms 2 and 3 - left.
- Press and hold the key, any information is then displayed.
To extend booms 2 + 3 - left:
- Operate the tractor's corresponding control unit.
- Press the key or another function key [except F4] to cancel the preselection.
- Press the key to preselect booms 2 and 3 - right.
- Press and hold the key, any information is then displayed.
To extend booms 2 + 3 - right:
- Operate the tractor's corresponding control unit.
- Press the key or another function key [except F4] to cancel the preselection.
- Press one of the keys to preselect the slope compensation.
To set the slope compensation:
- Operate the tractor's corresponding control unit.
To Next Page
Loading...