Lenovo ThinkServer TD230 - Removing the Microprocessor

Removingthemicroprocessor
Attention:
DonotopenyourserverorattemptanyrepairbeforereadingandunderstandingtheSafetyInformationandthe
WarrantyandSupportInformationontheThinkServerDocumentationDVDthatcamewithyourproduct,and
“Guidelines”onpage39
.Toobtainacopyofthepublications,goto:
http://www.lenovo.com/support
Thissectionprovidesinstructionsonhowtoremovethemicroprocessor.
CAUTION:
Theheatsinkandfanassemblymightbeveryhot.Turnofftheserverandwaitthreetove
minutestolettheservercoolbeforeremovingtheservercover.
Toremovethemicroprocessor,dothefollowing:
1.Removeallmediafromthedrivesandturnoffallattacheddevicesandtheserver.Then,disconnectall
powercordsfromelectricaloutletsanddisconnectallcablesthatareconnectedtotheserver.
2.Removetheservercover.See“Removingtheservercover”onpage43.
3.Laytheserveronitssideforeasieroperation.
4.Removetheheatsinkandfanassembly.See“Removingtheheatsinkandfanassembly”onpage96.
5.Liftthesmallhandleandopentheretainertoaccessthemicroprocessor.Then,carefullyliftthe
microprocessorstraightupandoutofthesocket,andplaceitonastatic-protectivesurface.
Note:Touchonlytheedgesofthemicroprocessor.
Figure73.Removingthemicroprocessor
6.Ifyouareinstructedtoreturnthemicroprocessortothemanufacturer,followallpackaginginstructions
anduseanypackagingmaterialsthataresuppliedtoyouforshipping.
7.Tocompletetheremovalprocedure,goto“Completingthepartsreplacement”onpage122.
110ThinkServerTD230HardwareMaintenanceManual