Lenovo ThinkServer TD230 - Removing a Non-Hot-Swap Hard Disk Drive

8.Pressthehandle1torotateittotheclosedpositionuntilthebluereleasebuttonsnapsintoplaceand
thebracketwiththeharddiskdriveissecurelylockedinthedrivebay.
Figure34.Lockingthehot-swapharddiskdriveinthedrivebay
9.ChecktheharddiskdrivestatusLEDstomakesurethattheharddiskdriveisoperatingcorrectly.You
mighthavetorestarttheserverforthenewlyinstalleddrivetoberecognized.Iftheamberharddiskdrive
statusLEDislitcontinuously,thisindicatesthattheharddiskdriveisfaultyandmustbereplaced;ifthe
greenharddiskdrivestatusLEDisblinking,thisindicatesthattheharddiskdriveisoperatingcorrectly.
Note:IftheserverisconguredforRAIDoperationusingaRAIDcontroller,youmighthaveto
recongurethediskarraysafteryoureplaceharddiskdrives.
10.Tocompletetheinstallation,goto“Completingthepartsreplacement”onpage122.
Removinganon-hot-swapharddiskdrive
Attention:
DonotopenyourserverorattemptanyrepairbeforereadingandunderstandingtheSafetyInformationandthe
WarrantyandSupportInformationontheThinkServerDocumentationDVDthatcamewithyourproduct,and
“Guidelines”onpage39
.Toobtainacopyofthepublications,goto:
http://www.lenovo.com/support
Chapter5.ReplacingFRUs65