Lenovo ThinkServer TD230 - Removing or Installing the Heat Sink and Fan Assembly

Figure62.MiniSAScablewithfourSASconnectors
Note:WhenyouareconnectingthecablestothecorrespondingSASconnectors(0-3)onthehot-swaphard
diskdrivebackplanes,followthesequenceindicatedbythenumberonthelabeloneachcable.
SASconnectorSAScablelabelSATA/SASconnectoronthe
hot-swapharddiskdrive
backplanes
6
P1
SATA/SASconnector0
7
P2
SATA/SASconnector1
8
P3
SATA/SASconnector2
9
P4
SATA/SASconnector3
Removingorinstallingtheheatsinkandfanassembly
Thissectionprovidesinstructionsonhowtoremoveorinstalltheheatsinkandfanassembly.
Removingtheheatsinkandfanassembly
Attention:
DonotopenyourserverorattemptanyrepairbeforereadingandunderstandingtheSafetyInformationandthe
WarrantyandSupportInformationontheThinkServerDocumentationDVDthatcamewithyourproduct,and
“Guidelines”onpage39
.Toobtainacopyofthepublications,goto:
http://www.lenovo.com/support
Thissectionprovidesinstructionsonhowtoremovetheheatsinkandfanassembly.
CAUTION:
Hazardousmovingparts.Keepngersandotherbodypartsaway.
CAUTION:
Theheatsinkandfanassemblymightbeveryhot.Turnofftheserverandwaitthreetove
minutestolettheservercoolbeforeremovingtheservercover.
96ThinkServerTD230HardwareMaintenanceManual