3.FollowtheinstructionsonthescreentoselecttheRAIDvolume.
4.SelectYesandpressEntertodeletetheRAIDvolume.
RebuildingtheRAIDvolume
Whenthereisafailingharddiskdriveinthevolume,youneedtoreplacetheharddiskdrive.Youcanrestore
theRAIDvolumethroughtherebuildingfunction.
TorebuildtheRAIDvolume,dothefollowing:
1.Dooneofthefollowing:
•SelectManagement➙Rebuildfromthemainmenu.Theharddiskdriveselectionwindowopens.
ThefailingharddiskdrivewillbemarkedasFAIL.
•SelectObjects➙PhysicalDrivefromthemainmenu.
2.Usethespacekeytoselecttheharddiskdrivethatneedstoberebuilt.
3.PressF10.Whenprompted,selectYestostartrebuilding.Theharddiskdrivestatuswillbeshownas
REBUILD.
4.Afternishrebuilding,pressanykeytocontinueotheroperationsyouwanttodo.
CheckingtheRAID1volumeconsistency
CheckingtheconsistencyoftheRAIDvolumehelpsyoundtheproblemaboutinconsistencyvolumedata
andthenautomaticallyrestorethisproblem.ThisfunctiononlyappliestoRAID1.
Thecontrollercanonlyreporttheinconsistencyorreportandxtheinconsistency.Fromthemainmenu,
selectObjects➙Adapter➙Chkconstatetosetthecontroller.
TochecktheconsistencyoftheRAID1volume,dothefollowing:
1.SelectManagement➙CheckConsistencyfromthemainmenuandpressEnter.TheCheck
Consistencymenuopens.
2.UsethespacekeytoselectthedesiredRAIDvolume.
Note:OnlytheRAID1volumecanbeselected.IfyouselectotherRAIDvolume,forexampleRAID0,a
messagewillbedisplayed,showingthisvolumecannotbeselected.
3.PressF10.Whenprompted,selectY estostartcheckingtheconsistency.
ConnectingtheSATAcables
ThistopicprovidesinstructionsonhowtoconnecttheSATAcable(s)tothehot-swapharddiskdrive
backplanesandthesystemboard.
Ifyouareconnectingthehot-swapharddiskdrivebackplanestothesystemboard,usethe790mm(31.70
inches)SATAcableassemblythatcomeswithyourserver.ConnectoneendoftheSATAcabletothe
SATA/SASconnectoronthehot-swapharddiskdrivebackplanes,andthenconnecttheotherendofthe
SATAcabletotheSATAconnectoronthesystemboard.
156ThinkServerTD230HardwareMaintenanceManual
To Next Page
Loading...
Need help?
General