Lenovo ThinkServer TD230 - Installing the Microprocessor

Installingthemicroprocessor
Attention:
DonotopenyourserverorattemptanyrepairbeforereadingandunderstandingtheSafetyInformationandthe
WarrantyandSupportInformationontheThinkServerDocumentationDVDthatcamewithyourproduct,and
“Guidelines”onpage39
.Toobtainacopyofthepublications,goto:
http://www.lenovo.com/support
Thissectionprovidesinstructionsonhowtoinstallthemicroprocessor.
CAUTION:
Theheatsinkandfanassemblymightbeveryhot.Turnofftheserverandwaitthreetove
minutestolettheservercoolbeforeremovingtheservercover.
Foroptimalperformance,followthesemicroprocessorinstallationrules:
1.Whentwomicroprocessorsareinstalled,bothmusthavethesamecorevoltageandcorespeed.
2.Whenonlyonemicroprocessorisinstalled,itmustbeinthemicroprocessor1socket.Theother
socketmustbeempty.
3.Alwaysinstallthemicroprocessorrstintothemicroprocessor1socket,andtheninstallanother
microprocessorintothemicroprocessor2socketifyouwanttoinstalltwomicroprocessors.
Toinstallthemicroprocessor,dothefollowing:
1.Removeallmediafromthedrivesandturnoffallattacheddevicesandtheserver.Then,disconnectall
powercordsfromelectricaloutletsanddisconnectallcablesthatareconnectedtotheserver.
2.Removetheservercover.See“Removingtheservercover”onpage43.
3.Laytheserveronitssideforeasieroperation.
4.Removetheheatsinkandfanassemblyifnecessary.See“Removingtheheatsinkandfanassembly”
onpage96.
5.Pressdownandgentlypushthesmallhandlealittlebitoutwardonthemicroprocessorsockettoliftthe
handletotheopenposition.
Figure74.Liftingthehandle
Chapter5.ReplacingFRUs111