Lenovo ThinkServer TD230 - Initializing the RAID Volume; Deleting the RAID Volume

4.Afteryounishselectingthephysicaldrives,pressEnterorF10.Thearrayselectionwindowopens.
Pressthespacekeytoselectthearray.
5.PressF10,theVirtualDrive(s)Conguredwindowopens.Thefollowingtableisanexampleaboutthe
informationonthiswindow.
VirtualDrive(s)Congured
VDRAID
Size#StripesStripSzStatus
0073664MB164KB
ONLINE
6.SelectRAIDontheVirtualDrive(s)ConguredwindowandpressEnter.TheRAIDarrayselection
menuopens.
7.SelecttheRAIDarrayyouwanttocreateandpressEnter.
8.Setthestripesizeforthenewarray.Then,selectACCEPTandpressEnter.
Note:IfyouarecreatingaRAIDvolumebyusingtheNewCongurationoption,youcanalsoset
thevolumecapacity.
9.Followtheinstructionsonthescreentonishallsettings.Then,pressEsctoexittheprogram.When
prompted,selectYesandpressEntertosavetheconguration.
10.PressEsctogobacktothemainmenu.Then,initializetheRAIDvolumeyouhavecreated.See
“InitializingtheRAIDvolume”onpage155.
InitializingtheRAIDvolume
ThissectionprovidesinstructionsonhowtoinitializetheRAIDvolumeyouhavecreated.Afteryoucreate
anewRAIDvolume,itisrecommendedthatyouinitializethecreatedRAIDvolume.However,initializing
theRAIDvolumewilldeletethedataontheselectedRAIDvolume.
ToinitializetheRAIDvolumeyouhavecreated,dothefollowing:
1.Dooneofthefollowing:
•SelectManagement➙Initializefromthemainmenuandthenusethespacekeytoselectthe
desiredRAIDvolume.PressF10tostartinitializingtheRAIDvolume.
•SelectObjects➙LogicalDrivefromthemainmenuandthenselectthedesiredRAIDvolume.
PressF10tostartinitializingtheRAIDvolume.
2.Whenprompted,selectYesandpressEntertocontinuetheinitialization.
3.WhenyounishinitializingtheRAIDvolume,pressEsctogobacktothemainmenu.
Duringtheprocessoftheinitialization,youcanpressEscforthefollowingoptions:
•Stop-stopthecurrentprocess
•Continue-continuethecurrentprocess
•Abort-exitthecurrentprocess
DeletingtheRAIDvolume
ThissectionprovidesinstructionsonhowtodeletetheRAIDvolume.
TodeletetheRAIDvolume,dothefollowing:
1.SelectManagement➙CongurefromthemainmenuandpressEnter.TheCongurationMenu
opens.
2.SelectClearConguration.
Chapter7.Conguringtheserver155