Lenovo ThinkServer TD230 - Page 84

5.LocatetheSATAkeyconnectoronthesystemboard.See“Locatingpartsonthesystemboard”on
page33.Then,installtheRAID5keyintotheSATAkeyconnector.
Figure46.InstallingtheRAID5key
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•Tocompletetheinstallation,goto“Completingthepartsreplacement”onpage122
.Then,referto
Chapter7“Conguringtheserver”onpage143forinformationaboutRAIDconguration.
RemovingtheRAID5key
Attention:
DonotopenyourserverorattemptanyrepairbeforereadingandunderstandingtheSafetyInformationandthe
WarrantyandSupportInformationontheThinkServerDocumentationDVDthatcamewithyourproduct,and
“Guidelines”onpage39
.Toobtainacopyofthepublications,goto:
http://www.lenovo.com/support
ThissectionprovidesinstructionsonhowtoremovetheRAID5Keyfromthesystemboard.Ifyouremove
theRAID5KeyforAdvancedRAID,theRAID5congurationfunctionoftheonboardSATARAIDbecomes
unavailable.However,theRAID5congurationfunctionoftheThinkServerRAID500Adapterisstill
availableifyouhaveinstalledtheThinkServerRAID500UpgradeKeyforAdvancedRAIDontheadapter.
See“InstallingtheTR500key”onpage79
.
ToremovetheRAID5key,dothefollowing:
Attention:Electrostaticdischarge(ESD)candamagetheRAID5key.Alwaysgroundyourselfandusea
groundstrapbeforetouchingtheoption.PerformthefollowingprocedureatanESD-safeworkstation.
1.Removeallmediafromthedrivesandturnoffallattacheddevicesandtheserver.Then,disconnectall
powercordsfromelectricaloutletsanddisconnectallcablesthatareconnectedtotheserver.
2.Removetheservercover.See“Removingtheservercover”onpage43.
3.Laytheserveronitssideforeasieroperation.
78ThinkServerTD230HardwareMaintenanceManual