• Correct – The battery's metal flange is completely inserted in the slot on the controller:
• Incorrect – The battery's metal flange is not inserted into the slot on the controller:
Go to Step 2: Re-install controller canister
Step 2: Re-install controller canister
Reinstall the controller canister into the controller shelf after installing the new battery.
Step 1. Reinstall the cover on the controller canister by sliding the cover from back to front until the button
clicks.
Step 2. Turn the controller canister over, so that the removable cover faces down.
Step 3. With the cam handle in the open position, slide the controller canister all the way into the controller
shelf.
Chapter 3. Hardware replacement procedures 97
To Next Page
Loading...
