verifying and setting HA state of 52
controllers
cabling to data network switches 19–21
cabling to Ethernet switches 20–21
cabling to FC switches 19–20
cabling to management network switches 19–21
considerations for replacing DIMMs in controller
modules 59
considerations for replacing NVMEM battery in controller
modules 35
considerations for replacing RTC battery in controller
modules 72
considerations for upgrading controller hardware 87
creating an aggregate and moving volumes to the new
controllers when upgrading controller hardware 101
deleting SAN LIFs from the original 103
installing and joining new controllers to the cluster when
upgrading controller hardware 101
introduction to upgrading controller hardware by moving
storage 90
introduction to upgrading controller hardware by moving
volumes 100
methods for upgrading controller hardware 90
moving internal drives from original 96
moving non-SAN data LIFs and cluster management LIFs to
the new 102
preparing for controller hardware upgrade when moving
volumes from original 100
preparing for the upgrade when moving storage 90
reassigning disks to the new 97
recabling after running diagnostics 56
shutting down 29, 36, 44, 60, 73, 78
unjoining the original from the cluster 104
workflow for upgrading by moving storage 88
workflow for upgrading by moving volumes 89
copying an image to the boot media
using a USB flash drive 70
creating a personalized support web page 125
custom support web page 125
D
data LIFs
moving non-SAN and cluster management LIFs to the new
controllers 102
degraded controllers
introduction to shutting down 29, 35, 44, 60, 73
shutting down 36, 44, 60, 73, 78
device failures
running diagnostics after 121
diagnostics
running after device failure 121
running after hardware installation 118
running after slow system response 114
running after system installation 109
running after system panic 112
DIMMs
considerations for replacing 59
considerations for replacing in a controller 59
DIMMs
error correction codes (ECC), considerations for 59
installing 62
locating 62
moving from old controller module to replacement controller
module 48
removing 62
replacing 62
running diagnostics 65
running system-level diagnostics 65
verifying there is no content in NVMEM 62
workflow diagram 59
DIMMs diagnostics
running 65
DIMMs system-level diagnostics
running 65
disks
hot-swapping 27
reassigning to the new controllers 97
disruptive upgrade methods
for controller hardware 87
disruptive upgrades
methods for upgrading controller hardware 90
workflow for upgrading by moving storage 88
DM3000x systems
preparing for installation 17
DM5000x systems
installing the hardware 18
preparing for installation 17
drive shelves
converting original controllers to 97
introduction to moving internal storage or converting the
system to 95
drives
moving to a new chassis 81
E
error correction codes (ECC)
DIMMs, considerations for 59
F
failures
running diagnostics after device 121
G
gaseous contamination 132
Getting help 125
H
HA pair
cabling storage 22
HA pairs
recabling after running diagnostics 56
HA state
verifying and setting for controller modules 52
verifying and setting for the chassis 83
HA systems
verifying system ID changes on replacement controllers
running ONTAP 57
hardware
installing DM3000x system 18
tasks for replacing controller module 45
hardware installations
running diagnostics after 118
hardware replacement
tasks for restoring and verifying system configuration
after 52
hardware service and support telephone numbers 126
hardware, controller
methods for upgrading 87
preparing for the upgrade when moving storage 90
help 125
hot-swapping
disks 27
power supply 41, 79
136 ThinkSystem DM3000x and DM5000x Hardware Installation and Maintenance Guide
To Next Page
Loading...
Need help?
General