The Active Memory feature improves the reliability of memory through memory mirroring. Memory 
mirroring mode replicates and stores data on two pairs of DIMMs within two channels simultaneously. If a 
failure occurs, the memory controller switches from the primary pair of memory DIMMs to the backup pair 
of DIMMs.
•  Large system-memory capacity
The server supports synchronous dynamic random-access memory (SDRAM) registered dual inline 
memory modules (DIMMs) with error correcting code (ECC). For more information about the specific types 
and maximum amount of memory, see “Specifications” on page 4.
•  Integrated Trusted Platform Module (TPM)
This integrated security chip performs cryptographic functions and stores private and public secure keys. 
It provides the hardware support for the Trusted Computing Group (TCG) specification. You can 
download the software to support the TCG specification when the software is available.  
Note: For customers in Chinese Mainland, integrated TPM is not supported. However, customers in 
Chinese Mainland can install a Trusted Cryptographic Module (TCM) adapter or a Lenovo-qualified TPM 
adapter (sometimes called a daughter card).
•  Large data-storage capacity and hot-swap capability 
With the hot-swap feature, you can add, remove, or replace hard disk drives without turning off the server.
•  Light path diagnostics 
Light path diagnostics provides LEDs to help you diagnose problems. For more information about the light 
path diagnostics, see Light path diagnostics panel and Light path diagnostics LEDs.
•  Mobile access to Lenovo Service Information website 
The server comes with a QR code on the system service label, which is on the cover of the server, that you 
can scan with a QR code reader and scanner with a mobile device to get quick access to the Lenovo 
Service Information website. The Lenovo Service Information website provides additional information for 
parts installation, replacement videos, and error codes for server support. 
•  Active Energy Manager 
Lenovo XClarity Energy Manager is a power and temperature management solution for data centers. You 
can monitor and manage the power consumption and temperature of Converged, NeXtScale, System x, 
ThinkServer and ThinkSystem servers, and improve energy efficiency with Lenovo XClarity Energy 
Manager.
•  Redundant networking connection
The Lenovo XClarity Controller provides failover capability to a redundant Ethernet connection with the 
applicable application installed. If a problem occurs with the primary Ethernet connection, all Ethernet 
traffic that is associated with the primary connection is automatically switched to the optional redundant 
Ethernet connection. If the applicable device drivers are installed, this switching occurs without data loss 
and without user intervention.
•  Redundant cooling and optional power capabilities 
The redundant cooling by the fans in the server enables continued operation if one of the fans fails. 
•  ThinkSystem RAID support 
The ThinkSystem RAID adapter provides hardware redundant array of independent disks (RAID) support 
to create configurations. The standard RAID adapter provides RAID levels 0, 1, and 10. An optional RAID 
adapter is available for purchase.
Chapter 1. Introduction 3