Lenovo ThinkSystem SR860 V2 - Install the Chassis Air Baffle; Install an Adapter into a 4 U Pcie Riser Cage

Table 38. 7mm drive cage cables
1 7mm drive PCIe connector
2 7mm drive power connector
Install the chassis air baffle
Follow instructions in this section to install the chassis air baffle.
About this task
Watch the procedure. A video of this procedure is available from the following links:
•
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C6QgmsUMRG6ul0bHzrGmsG
• https://list.youku.com/albumlist/show/id_54461099
Procedure
Step 1. Align the chassis air baffle with the guides on both sides of the server, and lower it until it stops.
Figure 114. Installing the chassis air baffle
Install an adapter into a 4U PCIe riser cage
Follow instructions in this section to install an adapter into a 4U PCIe riser cage.
About this task
Watch the procedure. A video of this procedure is available from the following links:
•
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C6QgmsUMRG6ul0bHzrGmsG
• https://list.youku.com/albumlist/show/id_54461099
Procedure
Notes: Make sure to install the following adapters in corresponding slots in appropriate riser cages:
• T4:
218
ThinkSystem SR860 V2Setup Guide