Lenovo ThinkSystem SR860 V2 - Install a Drive Backplane Carrier Assembly

Figure 73. Removing the fan cage assembly
Step 2. Lift the fan cage assembly to remove it.
Install a drive backplane carrier assembly
Follow instruction in this section to install a drive backplane carrier assembly.
About this task
Watch the procedure. A video of this procedure is available from the following links:
• https://www.youtube.com/playlist?list=PLYV5R7hVcs-C6QgmsUMRG6ul0bHzrGmsG
• https://list.youku.com/albumlist/show/id_54461099
Procedure
Step 1. If necessary, install each backplane to the carrier with two screws.
182
ThinkSystem SR860 V2Setup Guide