Contents
Safety .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . iii
Safety inspection checklist .  .  .  .  .  .  .  .  .  .  . iv
Chapter 1.  Introduction .  .  .  .  .  .  .  .  . 1
Server package contents .  .  .  .  .  .  .  .  .  .  .  .  2
Features.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  2
Specifications .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  4
Particulate contamination .  .  .  .  .  .  .  .  .  .  8
Management options.  .  .  .  .  .  .  .  .  .  .  .  .  .  9
Chapter 2.  Server components .  .  .  .  13
Front view .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
LCD diagnostics panel .  .  .  .  .  .  .  .  .  .  17
Rear view .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  22
Identifying connectors .  .  .  .  .  .  .  .  .  .  .  .  26
System board connectors .  .  .  .  .  .  .  .  .  27
Processor and memory expansion tray  
connectors .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  29
Power backplane connectors.  .  .  .  .  .  .  .  30
2.5-inch 8-bay drive backplane connectors .  .  31
PCIe riser card connectors.  .  .  .  .  .  .  .  .  33
4U PCIe riser cage connectors .  .  .  .  .  .  .  35
Parts list.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  37
Power cords .  .  .  .  .  .  .  .  .  .  .  .  .  .  41
Chapter 3.  Internal cable routing .  .  .  43
Cable routing for 2.5-inch drives .  .  .  .  .  .  .  .  43
Connecting cables to the processor and 
memory expansion tray .  .  .  .  .  .  .  .  .  .  46
Connecting cables to the NVMe switch  
cards .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  48
SAS/SATA backplane combinations .  .  .  .  .  51
One-NVMe-backplane combinations.  .  .  .  .  64
Two-NVMe-backplane combinations.  .  .  .  .  66
Three-NVMe-backplane combinations .  .  .  .  69
One-AnyBay-backplane combinations .  .  .  .  75
Two-AnyBay-backplane combinations .  .  .  .  100
Three-AnyBay-backplane combinations .  .  .  122
Chapter 4.  Server options .  .  .  .  .  .  . 133
2.5-inch drive backplane kits.  .  .  .  .  .  .  .  .  .  133
2.5-inch SAS/SATA 8-bay drive backplane  
kit .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  134
2.5-inch AnyBay/NVMe 8-bay drive backplane 
kit .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  135
2.5-inch drive SAS/SATA cable kits .  .  .  .  .  .  .  135
On-board connector and 8i RAID adapter 
cable kit .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  135
16i and 32i RAID adapter cable kit .  .  .  .  .  .  136
2.5-inch NVMe drive PCIe cable kits .  .  .  .  .  .  .  137
On-board PCIe NVMe cable kit .  .  .  .  .  .  .  137
Processor and memory expansion tray PCIe 
NVMe cable kit .  .  .  .  .  .  .  .  .  .  .  .  .  137
PCIe switch card NVMe cable kit .  .  .  .  .  .  138
Intrusion switch cable kit .  .  .  .  .  .  .  .  .  .  .  138
M.2 backplane cable kit.  .  .  .  .  .  .  .  .  .  .  .  138
7mm drive cage kit .  .  .  .  .  .  .  .  .  .  .  .  .  139
PCIe riser cards.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  140
x16/x16 (x8 lanes) FH/HL PCIe riser kit .  .  .  .  140
x16/x16/x16 PCIe riser kit .  .  .  .  .  .  .  .  .  141
4U PCIe riser cage kit .  .  .  .  .  .  .  .  .  .  .  .  141
Dual-rotor fan module upgrade kit .  .  .  .  .  .  .  143
Processor and memory expansion tray kit .  .  .  .  144
Chapter 5.  Server hardware  
setup .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 147
Server setup checklist .  .  .  .  .  .  .  .  .  .  .  .  147
Installation Guidelines .  .  .  .  .  .  .  .  .  .  .  .  148
Safety inspection checklist.  .  .  .  .  .  .  .  .  149
System reliability guidelines .  .  .  .  .  .  .  .  150
Working inside the server with the power  
on .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  150
Handling static-sensitive devices .  .  .  .  .  .  150
Memory module installation rules and order .  .  .  .  151
DRAM DIMMs installation order.  .  .  .  .  .  .  153
PMEM and DRAM DIMM installation order .  .  159
Install hot-swap server hardware options .  .  .  .  .  164
Install a 7mm drive .  .  .  .  .  .  .  .  .  .  .  .  164
Install a 2.5-inch hot-swap drive .  .  .  .  .  .  165
Install a hot-swap power supply unit .  .  .  .  .  167
Remove the top cover .  .  .  .  .  .  .  .  .  .  .  .  170
Remove a 7mm drive.  .  .  .  .  .  .  .  .  .  .  .  .  171
Remove the chassis air baffle .  .  .  .  .  .  .  .  .  172
Remove a 4U PCIe riser cage .  .  .  .  .  .  .  .  .  173
Remove the 7mm drive cage.  .  .  .  .  .  .  .  .  .  174
Remove the M.2 backplane bracket assembly and  
drives.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  174
Remove the 4U PCIe expansion tray.  .  .  .  .  .  .  176
Install server hardware options in the server .  .  .  .  178
Install the dual-rotor fan module upgrade  
kit .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  178
Remove the fan cage assembly .  .  .  .  .  .  .  180
Install a drive backplane carrier assembly .  .  .  182
Remove the PCIe riser assembly .  .  .  .  .  .  184
Install an adapter .  .  .  .  .  .  .  .  .  .  .  .  186
© Copyright Lenovo 2020, 2021 i