App Direct Mode
In this mode, PMEMs act as independent and persistent memory resources directly accessible by specific
applications, and DRAM DIMMs act as system memory.
With two processors
Table 32. Memory population in App Direct Mode with two processors
• D: 32 GB RDIMM, 64 GB RDIMM, or 128 GB 3DS RDIMM
• P: 128 GB, 256 GB, or 512 GB Persistent Memory Module (PMEM)
Configuration
Processor 1 Processor 2
1 2 3 4
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
12 PMEMs
and 12 DIMMs
D P D P D P P D P D P D D P D P D P P D P D P D
With four processors
Table 33. Memory population in App Direct Mode with four processors
• D: 32 GB RDIMM, 64 GB RDIMM, or 128 GB 3DS RDIMM
• P: 128 GB, 256 GB, or 512 GB Persistent Memory Module (PMEM)
Configuration
Processor 1 Processor 2
1 2 3 4
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Processor 3 Processor 4
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
24 PMEMs
and 24 DIMMs
D P D P D P P D P D P D D P D P D P P D P D P D
Install hot-swap server hardware options
Follow the instructions in this section to install hot-swap server hardware options.
Install a 7mm drive
Follow the instructions in this section to install a 7mm drive.
About this task
Watch the procedure. A video of this procedure is available from the following links:
•
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C6QgmsUMRG6ul0bHzrGmsG
• https://list.youku.com/albumlist/show/id_54461099
Procedure
Step 1. If a drive filler has been installed in the drive bay, remove it.
164 ThinkSystem SR860 V2Setup Guide
To Next Page
Loading...
Need help?
General