Figure 78. Disassembling the PCIe riser card
2. Recycle the component in compliance with local regulations.
Install an adapter
Follow the instructions in this section to install an adapter.
About this task
Notes:
• The following adapters must be installed in 4U PCIe riser cages. See “Install an adapter into a 4U PCIe
riser cage” on page 218 for installation instructions.
– Nvidia Tesla V100s
– Nvidia Tesla T4
– 1610-8p NVMe switch adapter
• The following adapters must be installed in the PCIe riser assembly or 4U PCIe riser cages. See “Install an
adapter in the PCIe riser assembly” on page 187 or “Install an adapter into a 4U PCIe riser cage” on page
218 for installation instructions.
– ThinkSystem Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter
– ThinkSystem Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter V2
Install an adapter on the system board
Watch the procedure. A video of this procedure is available from the following links:
•
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C6QgmsUMRG6ul0bHzrGmsG
• https://list.youku.com/albumlist/show/id_54461099
186 ThinkSystem SR860 V2Setup Guide
To Next Page
Loading...
