Figure 77. Removing the PCIe riser assembly
After this task is completed
• Fill the riser slot with a replacement unit or a filler (see “Install the PCIe riser assembly” on page 190).
• If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
• If you plan to recycle the component:
1. Remove the three screws that secure the riser assembly to the bracket, and slide the riser assembly
slightly away to disengage and remove it from the bracket.
Chapter 5. Server hardware setup 185
To Next Page
Loading...
