Lenovo ThinkSystem SR860 V2 - Remove the System Board Air Baffle

Figure 84. Connecting PCIe cables from x16/x16/x16 riser to the system board
1 PCIe connector 1 2 PCIe connector 2
After this task is completed
1. Reconnect all the required cables.
Remove the system board air baffle
Follow instructions in this section to remove the system board air baffle.
About this task
Watch the procedure. A video of this procedure is available from the following links:
•
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C6QgmsUMRG6ul0bHzrGmsG
• https://list.youku.com/albumlist/show/id_54461099
Procedure
Step 1. Lift the system air baffle to remove it from the server.
192
ThinkSystem SR860 V2Setup Guide