Figure 39. M.2 backplane cable kit
1 One M.2 bracket
2 One M.2 power/signal cable
Follow the instructions in “Install the M.2 drive and backplane bracket assembly” on page 211 to learn how
to install the option kit.
7mm drive cage kit
See this section to identify parts that are enclosed in the 7mm drive cage kit.
This option kit comes with the following components.
Figure 40. 7mm drive cage kit
1 One power cable
2 One 7mm drive cage
3 One label (SATA/NVMe)
4 Two 7mm drive fillers
5 One signal cable
Follow the instructions in “Install the 7mm drive cage” on page 216 to learn how to install the option kit.
Chapter 4. Server options 139
To Next Page
Loading...
