Lenovo ThinkSystem SR860 V2 - Page 168

• Lenovo XClarity Provisioning Manager (LXPM)
To open LXPM, power on the system and press F1 as soon as the logo screen appears. If a password has
been set, enter the password to unlock LXPM.
Go to UEFI Setup ➙ System Settings ➙ Intel Optane PMEMs to configure and manage PMEMs.
For more details, see the “UEFI setup” section in the LXPM documentation compatible with your server at
Lenovo XClarity Provisioning Manager portal page.
Note: If the text-based interface of Setup Utility opens instead of LXPM, go to System Settings ➙ <F1>
Start Control and select Tool Suite. Then, reboot the system and press F1 as soon as the logo screen
appears to open LXPM.
• Setup Utility
To enter Setup Utility:
1. Power on the system and press F1 to open LXPM.
2. Go to UEFI Settings ➙ System Settings, click on the pull-down menu on the upper right corner of
the screen, and select Text Setup.
3. Reboot the system, and press F1 as soon as the logo screen appears.
Go to System Configuration and Boot Management ➙ System Settings ➙ Intel Optane PMEMs to
configure and manage PMEMs.
• Lenovo XClarity Essentials OneCLI
Some management options are available in commands that are executed in the path of Lenovo XClarity
Essentials OneCLI in the operating system. See
https://sysmgt.lenovofiles.com/help/topic/toolsctr_cli_
lenovo/onecli_t_download_use_tcscli.html
to learn how to download and use Lenovo XClarity Essentials
OneCLI.
Following are the available management options:
• Intel Optane PMEMs details
Select this option to view the following details concerning each of the installed PMEMs:
– Number of Intel Optane PMEMs detected
– Total raw capacity
– Total memory capacity
– Total App Direct capacity
– Total unconfigured capacity
– Total inaccessible capacity
– Total reserved capacity
Alternatively, view PMEM details with the following command in OneCLI:
onecli.exe config show IntelOptanePMEM
--imm USERID:PASSW0RD@10.104.195.86
Notes:
– USERID stands for XCC user ID.
– PASSW0RD stands for XCC user password.
– 10.104.195.86 stands for IP address.
• Regions
After the memory percentage is set and the system is rebooted, regions for the App Direct capacity will be
generated automatically. Select this option to view the App Direct regions per processor.
• Namespaces
160
ThinkSystem SR860 V2Setup Guide