Class 1 Laser Product
Laser Klasse 1
Laser Klass 1
Luokan 1 Laserlaite
Appareil A Laser de Classe 1
`
Step6.Touchthestatic-protectivepackagethatcontainsthenewopticaldrivetoanyunpainted
metalsurfaceontheserver;then,removetheopticaldrivefromthepackageandplaceiton
astatic-protectivesurface.
Step7.Followtheinstructionsthatcomewiththedrivetosetanyjumpersorswitches.
Step8.Attachthedriveretentionclipthatyouremovedfromtheopticaldrivefillerpaneltothesideof
thenewopticaldrive.
Drive retention clip
Alignment pins
Figure93.Opticaldriveretentionclipinstallation
Step9.Aligntheopticaldriveinthedrivebayandslidetheopticaldriveintotheopticaldrivebayuntil
theopticaldriveclicksintoplace.
Figure94.Opticaldriveinstallation
Step10.Connecttheopticaldrivecable(see“Replacingtheopticaldrivecable”onpage158).
Step11.Reconnectthepowercordsandanycablesthatyouremoved.
Chapter5.Removingandreplacingcomponents163
To Next Page
Loading...
