Lenovo x3650 M5 - Removing a Usb Embedded Hypervisor Flash Device

3
2
1
Figure198.3.5-inchhot-swapharddiskdrivebackplaneinstallation
Step8.Connectthesignalandpower-configurationcablestothebackplaneandthesystemboard.See
“3.5-inchharddiskdrivecableconnection”onpage139formoreinformation.
Step9.Reinstalltheharddiskdrivesandfillerpanels(see“Replacingasimple-swapharddiskdrive”on
page155).
Step10.Replacethefancageassemblyandfansifyouremovedthem(see“Replacingthefancage
assembly”onpage172and“Replacingahot-swapfan”onpage174).
Step11.Installthetopcover(see“Replacingthetopcover”onpage144).
Step12.Slidetheserverintotherack.
Step13.Reconnectthepowercordsandanycablesthatyouremoved.
Step14.Turnontheperipheraldevicesandtheserver.
RemovingaUSBembeddedhypervisorflashdevice
UsethisinformationtoremoveaUSBembeddedhypervisorflashdevice.
ToremoveaUSBhypervisorflashdevice,completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”on
page289.
Step2.Turnofftheserverandperipheraldevicesanddisconnectthepowercords.
Step3.Removethetopcover(see“Removingthetopcover”onpage143).
Step4.Removetheflashdevice:
246LenovoSystemx3650M5InstallationandServiceGuide