–IMM2environmentalinformation
–EventlogsforServeRAIDcontrollersandserviceprocessors
–Installedhardware,includingPCIandUSBinformation
–LCDsysteminformationdisplaypanelstatus
–Microprocessor,input/outputhub,andUEFIerrorlogs
–Networkinterfacesandsettings
–Optioncarddriverandfirmwareinformation
–RAIDcontrollerconfiguration
–Serviceprocessor(integratedmanagementmodule)statusandconfiguration
–Systemconfiguration
–Vitalproductdata,firmware,andUEFIconfiguration
DSAPrebootalsoprovidesdiagnosticsforthefollowingsystemcomponents(whentheyareinstalled):
1.Emulexnetworkadapter
2.IMMI2Cbus
3.LCDsysteminformationdisplaypanel
4.Memorymodules
5.Microprocessors
6.Opticaldevices(CDorDVD)
7.SASorSATAdrives
8.LSIController
9.Broadcomnetworkadapter
10.FusionIOstorage
11.IntelGPU
12.NvidiaGPU
See“RunningtheDSAPrebootdiagnosticprograms”onpage79formoreinformationonrunningthe
DSAPrebootprogramontheserver.
•Troubleshootingbysymptom
Thesetableslistproblemsymptomsandactionstocorrecttheproblems.See“Troubleshootingby
symptom”onpage81formoreinformation.
Power-supplyLEDs
Thefollowingminimumconfigurationisrequiredfortheservertostart.
•Onemicroprocessorinmicroprocessorsocket1
•One4GBDIMMonthesystemboard
•Onepowersupply
•Powercord
•Fourcoolingfans(fan1,2,3,and5)
ACpower-supplyLEDs
ThefollowingminimumconfigurationisrequiredfortheDCLEDonthepowersupplytobelit:
•Powersupply
•Powercord
Note:YoumustturnontheserverfortheDCLEDonthepowersupplytobelit.
Chapter3.Troubleshooting71