Figure199.USBhypervisorflashdeviceremoval
a.UnlocktheretentionlatchontheUSBconnectorbypushingdownthebluelockingcollar.
b.Grasptheflashdeviceandpulltoremoveitfromtheconnector.
Step5.Ifyouareinstructedtoreturntheflashdevice,followallpackaginginstructions,anduseany
packagingmaterialsforshippingthataresuppliedtoyou.
ReplacingaUSBembeddedhypervisorflashdevice
UsethisinformationtoreplaceaUSBembeddedhypervisorflashdevice.
ToinstallaUSBhypervisorflashdevice,completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”on
page289
.
Step2.Turnofftheserverandperipheraldevicesanddisconnectthepowercords.
Step3.Removethetopcover(see“Removingthetopcover”onpage143).
Step4.Removetheriser-cardassembly(see“Removingariser-cardassembly”onpage179).
Step5.Installtheflashdevice:
Chapter5.Removingandreplacingcomponents247