Lenovo x3650 M5 - Page 319

SAS signal cable
(Y cable)
Power / configuration
cables
SAS 0 SAS 1
Figure278.Cableconnections
Step10.Ifyouremovedthefancageassembly,installit.(See“Replacingthefancageassembly”on
page172
).
Step11.Inserttheharddiskdrivesandthefillerstherestofthewayintothebays.
Step12.Installthetopcover(see“Replacingthetopcover”onpage144).
Step13.Slidetheserverintotherack.
Step14.Reconnectthepowercordsandanycablesthatyouremoved.
Step15.Turnontheperipheraldevicesandtheserver.
Installinga4x2.5-inchNVMePCIeSSDupgradekit
Usethisinformationtoinstalla4x2.5-inchNVMePCIeSSDupgradekit.
Toordera4x2.5-inchNVMePCIeSSDupgradekit,contactyoursalesrepresentativeorreseller.
The4x2.5-inchNVMePCIeSSDupgradekitcontainsthefollowingcomponents:
•Foursignalcables
•Onepower/configurationcable
•Onebackplaneassembly
Toinstallthe4x2.5-inchNVMePCIeSSDupgradekitintheserver,completethefollowingsteps.
Chapter5.Removingandreplacingcomponents307