Lenovo x3650 M5 - Page 61

–ResetIMMtoDefaults
SelectthischoicetovieworresetIMMtothedefaultsettings.
–ResetIMM
SelectthischoicetoresetIMM.
–Recovery
Selectthischoicetovieworchangethesystemrecoveryparameters.
–POSTAttempts
SelectthischoicetovieworchangethenumberofattemptstoPOST.
•POSTAttemptsLimit
SelectthischoicetovieworchangetheNxbootfailureparameters.
–SystemRecovery
Selectthischoicetovieworchangesystemrecoverysettings.
•POSTWatchdogTimer
SelectthischoicetovieworenablethePOSTwatchdogtimer.
•POSTWatchdogTimerValue
SelectthischoicetovieworsetthePOSTloaderwatchdogtimervalue.
•RebootSystemonNMI
Selectthischoicetoenableordisablerestartingthesystemwheneveranonmaskableinterrupt
(NMI)occurs.Enableisthedefault.
•HaltonSevereError
SelectthischoicetoenableordisablethesystemfrombootingintoOS,displayingthePOST
eventviewerwheneverasevereerrorwasdetected.Disableisthedefault.
–Storage
Selectthischoicetovieworchangethestoragedevicesettings.
–Network
Selectthischoicetovieworchangethenetworkdeviceoptions,suchasiSCSI.
–DriveHealth
Selectthischoicetoviewthestatusofthecontrollersinstalledinthebladeserver.
•DateandTime
Selectthischoicetosetthedateandtimeintheserver,in24-hourformat(hour:minute:second).
ThischoiceisonthefullSetuputilitymenuonly.
•StartOptions
Selectthischoicetovieworchangethestartoptions,includingthestartupsequence,keyboardNumLock
state,PXEbootoption,andPCIdevicebootpriority.Changesinthestartupoptionstakeeffectwhenyou
starttheserver.
Thestartupsequencespecifiestheorderinwhichtheserverchecksdevicestofindabootrecord.The
serverstartsfromthefirstbootrecordthatitfinds.IftheserverhasWakeonLANhardwareandsoftware
andtheoperatingsystemsupportsWakeonLANfunctions,youcanspecifyastartupsequenceforthe
WakeonLANfunctions.Forexample,youcandefineastartupsequencethatchecksforadiscinthe
CD-RW/DVDdrive,thencheckstheharddiskdrive,andthenchecksanetworkadapter.
ThischoiceisonthefullSetuputilitymenuonly.
•BootManager
Chapter2.Configurationinformationandinstructions49