Contents
6
Basic unit wiring
6.1
L
6.1-1
EDS82EV903-1.0-11/2002
6 Basic unit wiring
6.1 Contents
6.1 Contents 6.1-1................................................................
6.2 Important notes 6.2-1...........................................................
6.2.1 Protection of persons 6.2-1..............................................
6.2.2 Motor protection 6.2-2..................................................
6.2.3 Mains types/mains conditions 6.2-2.......................................
6.2.4 Operation on public mains (compliance with EN 61000-3-2) 6.2-3.................
6.2.5 Operation with e.l.c.bs (earth-leakage circuit-breakers) 6.2-4....................
6.2.6 Interactions with compensation equipment 6.2-4..............................
6.2.7 Specification of cables used 6.2-5........................................
6.2.8 Wiring of terminal strips 6.2-6............................................
6.3 Basics for wiring according to EMC 6.3-1............................................
6.3.1 Requirements on the cables 6.3-1.........................................
6.3.2 Shielding 6.3-2.......................................................
6.3.3 Install a tion in the control cabinet 6.3-3.....................................
6.3.4 Wiring outside the control cabinet 6.3-6....................................
6.4 Basic units in the power range 0.25 ... 2.2 kW 6.4-1....................................
6.4.1 Wiring according to EMC (installation of a CE-typical drive system) 6.4-2.............
6.4.2 Power connections for 230 V mains voltage 6.4-4..............................
6.4.3 Power connections for 400 V mains voltage 6.4-5..............................
6.4.4 Connection of motor/external brake resistor 6.4-6.............................
6.4.5 Relay output connection 6.4-7............................................
6.5 Basic units in the power range 3 ... 11 kW 6.5-1.......................................
6.5.1 Wiring according to EMC (installation of a CE-typical drive system) 6.5-2.............
6.5.2 Power connections for 230 V mains voltage 6.5-4..............................
6.5.3 Power connections for 400 V mains voltage 6.5-5..............................
6.5.4 Connection of motor/external brake resistor 6.5-6.............................
6.5.5 Relay output connection 6.5-7............................................