Basic units in the power range 3 ... 11 kW
Function modules
7
Extensions for automation
7.3
7.3.1
L
7.3-2
EDS82EV903-1.0-11/2002
4
19 8200vec372
Fig. 7.3-2 Additional worksteps
In addition fix the safety clip, so that the module is prevented from being pulled
out together with the terminal strips:
1. Turn the safety clip 4 in the openings.
2. Fold the safety clip over the function module until it snaps into place.
3min
OFF
0
8200vec072
Fig. 7.3-3 Worksteps
1. Disconnect the controller from the mains and wait for at least 3
minutes!
2. Catch the bar of the plug connector with pliers and pull 0 . Plug connector
and function module are dismounted together.
Mounting of function modules in
”PT” version
Dismounting of the function
modules