Lenze E82EV751K4C User Manual

Total index
2
Guide
2.3
L
2.3-9
EDS82EV903-1.0-11/2002
Signal flow diagram
- Controller state (STAT1, STAT2), 16.4-8
- Controller with application I/O, 16.3-3
- Controller with Application I/O and communication
module, 16.3-4
- Controller with communication module, 16.3-5
- Controller with fieldbus function module, 16.3-6
- Controller with fieldbus function module and
communication module, 16.3-7
- Controller with standard I/O, 16.3-1
- Controller with Standard I/O and communication
module, 16.3-2
- Controller with system bus function module, 16.3-8
- Controller with system bus function module and
communication module, 16.3-9
- Device control (DCTRL1), 16.4-7
- Fieldbus function module (FIF-IN, FIF-OUT), 16.4-12
- Motor control (MCTRL1), 16.4-5
- Motor control (MCTRL1) with Application I/O, 16.4-6
- Process controller and setpoint processing (PCTRL1),
16.4-3
- Process controller and setpoint processing (PCTRL1)
with Application I/O, 16.4-4
- Speed setpoint conditioning (NSET1), 16.4-1
- Speed setpoint conditioning (NSET1) with Application
I/O, 16.4-2
- System bus (CAN-Objekt 1, CAN-Objekt 2), 16.4-10
Signal names, Definitions, 2.2-2
Signal selection, Analog, 10.8-3
- Jumper position, 10.8-3
Signal selection , digital, 10.8-9
Signal-flow charts, 16.1-1
Skip frequency, 10.4-6
Slip compensation, 10.4-1
Smooth acceleration/deceleration, 10.7-1
Software version, 10.16-4, 10.20-11
Special motors, Operation of, 10.4-4
Speed control, 15.5-1
Speed oscillations, 10.4-4
Standard I/O
- Setpoint selection range, 8.6-5, 10.8-3, 10.20-9
- Terminal assignment, 7.2-4, 7.3-4, 7.4-4
Standard I/O PT, Terminal assignment, 7.2-8, 7.2-13,
7.3-8, 7.3-13, 7.4-8, 7.4-13
Start options, 10.5-1
Status display, E82ZBC keypad, 9.3-3
Status word, 10.20-17
Stopping, 10.7-1
Supply system, permissible, 4.2-2
Switching window, Frequency setpoint reached,
10.20-19
System bus, Remote parameter setting using the
E82ZBC keypad, 9.3-10
System description, 1.2-1
T
Technical data, 4.1-1
Technicaldata
- General data/application conditions, 4.2-1
- Operation at rated power, 4.3-1
Rated data 230 V, 4.3-1, 4.4-1
Rated data 400 V, 4.3-5
Rated data 500 V, 4.3-10
- Operation with increased rated power, 4.4-1
Rated data 400 V, 4.4-4
Rated data 500 V, 4.4-9
Temperature range, 4.2-1
Terminal assignment
-ApplicationI/O,7.2-9,7.3-9,7.4-9
-StandardI/O,7.2-4,7.3-4,7.4-4
- Standard I/O PT, 7.2-8, 7.2-13, 7.3-8, 7.3-13, 7.4-8,
7.4-13
Te r ms
- Controller, 2.2-1
- Definitions, 2.2-1
-Drive,2.2-1
Thermal monitoring, motor
- Sensorless, 10.14-1
- With PTC resistor, 10.14-3
Threshold
- Auto DCB, 10.7-4, 10.7-6, 10.20-8
- Brake transistor, 10.20-18, 13.4-1
- Qmin, 10.20-8
Torque control, Sensorless with speed limitation,
10.3-11
Torque limitation, 15.9-1
Torque thresholds
- Comparison value, 10.20-21
- Delay MSET1=MACT, 10.20-22
- Delay MSET2=MACT, 10.20-22
- Difference threshold for MSET1=MACT, 10.20-22
- Difference thresholds MSET2=MACT, 10.20-22
- Threshold 1, 10.20-22
- Threshold 2, 10.20-22
Torque/speed characteristic, 4.2-3
Total index, 2.3-1
Transferring parameter sets, , 10.17-1
TRIP reset, 10.15-1, 11.5-1
TRIP set, 10.15-1
Show/Hide Bookmarks

Lenze E82EV751K4C Specifications

General

Brand	Lenze
Model	E82EV751K4C
Category	DC Drives
Language	English