Safety and application notes for Lenze contr ollers
3
Safety information
3.2
L
3.2-1
EDS82EV903-1.0-11/2002
3.2 Safety and application notes for Lenze controllers
(in conformity with the Low-Voltage Directive 73/23/EEC)
Lenze controllers (frequency inverters, servo inverters, DC controllers) can
include live and rotating parts - depending on their type of protection - during
operation. Surfaces can be hot.
Non-authorized removal of the required cover, inappropriate use, incorrect
installation or operation, creates the risk of severe injury to persons or damage to
material assets.
For more detailed information please see the documentation.
All operations concerning transport, installation, and commissioning as well as
maintenance must be carried out by qualified, skilled personnel (IEC 364 and
CENELEC HD 384 or DIN VDE 0100 and IEC report 664 or DIN VDE 0110 and
national regulations for the prevention of accidents must be observed).
According to this basic safety information qualified skilled personnel are persons
who are familiar with the installation, assembly, commissioning, and operation of
the product and who have the qualifications necessary for their occupation.
Drive controllers are components which are designed for installation in electrical
systems or machinery. Theyarenot tobe used as household appliances. Theyare
intended exclusively for professional and commercial purposes according to EN
61000-3-2. The documentation includes information on compliance with the EN
61000-3-2.
When installing the drive controllers in machines, commissioning (i.e. starting of
operation as directed) is prohibited until it is proven that the machine complies
with the regulations of theECDirective 98/37/EC (Machinery Directive); EN60204
must be observed.
Commissioning (i.e. starting of operation as directed)is only allowed when there
is compliance with the EMC Directive (89/336/EEC).
The drive controllers meet the requirements of the Low-Voltage Directive
73/23/EEC. The harmonised standards of the series EN 50178/DIN VDE 0160
apply to the controllers.
The technical data and information on the connection conditions must be
obtained from the nameplate and the documentation. They must be observed in
any case.
Warning: The availability of controllers is restricted according to EN 61800-3.
These products can cause radio interferences in residential areas. In this case,
special measures are required.
Please observe the notes on transport, storage and appropriate handling.
Observe the climatic conditions according to EN 50178.
General
Application as directed
Transport, storage
To Next Page
Loading...
Need help?
General