104 | 2-27 HullLifting,TransportAndShipping
2-27 HULLLIFTING,TRANSPORTAND
SHIPPING
In the event of the hull being lifted, the
spreaderbeams&Slingsshouldbeplaced
at the bulkheads and adjusted for length
to ensure the vessel lifts horizontally.
Professionalriggersmustbeconsultedfor
liftingthevessel.
Onlandthevesselmaybesupportedonits
keelsaslongasthekeeltrailingedgesare
keptunloaded(asshownonthedrawing).
Cradlesforeandaftofthekeelsarerequired
topreventoverbalancing(asshownonthe
drawing). Professional riggers are to be
usedwhenpositioningtheboatonland.
Thevesselmaydryoutonitskeelsona
Sandy bottom as long as the keels are
evenlysupportedalongtheirlength.
For transportation the yacht should be
supported and secured as shown in the
drawings.Professionalboathaulersshould
beused.
ForShippingtheyachtshouldbeliftedas
shown in drawing. The dimensions given
areaguideforreferenceonly.Professional
boathaulersshouldbeused.Caremustbe
takenwhensecuringthevesseltoprevent
movement and damage to the
B1 TCF-010 Vessel Lifting Diagram
B1 TCF-008 Vessel support on Land
B1 TCF-009 Vessel Road Transport
B1 TCF-011 Shipping Detail
CAUTION
THESE DIAGRAMS AND INSTRUCTIONS
ARE INTENDED AS ADVICE AND
INFORMATION ONLY. ROBERTSON AND
CAINE (PTY) LTD, ITS MEMBERS AND /
OR ITS STAFF SHALL NOT BE LIABLE
FOR ANY DAMAGE TO THE VESSEL
AND/OR OTHER LOSS ARISING FROM
RELIANCE THEREON OR OTHERWISE