82 | 2-22 Windlass Operation
2-22 WINDLASSOPERATION
WindlassManualWinchHandle
The windlass breaker is situated in the
GalleylockerundertheGalleySink.
The windlass will only operate when the
Portengineisswitchedon.
AnchorChainSwivel
Windlass Remote Control
To operate the windlass:
1 Switchontheportengine.
2 Check that the windlass breaker is
switchedtoitsonposition.
3 Disconnect the Anchor Chain stopper
fromtheAnchorChain
4 Press the “UP” or “DOWN” buttons
as required on the Windlass Remote
Control.
5. ConnecttheAnchorBridleHooktothe
AnchorChain.
AnchorChainStopper
Windlass
Anchor