2-28 GeneralCleaning&Maintenance | 105
2-28 GENERAL CLEANING & MAINTENANCE
The intentionof thesection isto indicate
areasthatshouldbeinspectedregularlyto
ensuretheefcientandsafeoperation of
the vessel.
In all cases the instructions given in the
supplied equipment manuals must be
followedinordertomaintainthewarranty/
guaranteeofthespecicitem.
• The Vessel is manufactured in
accordance with the European
Recreational Craft Directive 94/25/EC
as amended by directive 2003/44/EC
andisCECertiedindesigncategories
A,B,C&D.
• ItisalsoNMMAcertiedinaccordance
with ABYC Standards
• For technical details and operating
instructionsrefertotherelevantsections
ofthisOwner’sManualandthespecic
equipmentinstructionmanual.
Thefollowingisasummaryofthecleaning
methods and materials recommended
by or prohibited for use by Robertson &
Caine. We recommend the use of 3M™
Marines Reconditioning andMaintenance
Products.
These products are specically designed
for breglass boats used in the marine
environment. The use of the following
recommended 3M™ marine products will
help maintain your boat to the highest
standards.
• 3M™MarineMulti-PurposeBoatsoap
• 3M™MarineProtectiveLiquidWax
• 3M™MarineUltraPerformancePaste
Wax
• 3M™MarineClean&ShineWax
• 3M™MarineMetalRestorerandPolish
• 3M™ Marine Outdoor Vinyl Cleaner,
Conditioner&Protector
• 3M™ Marine Aluminium Restorer &
polish
• 3M™MarineMildewBlock
A. INTERIOR AND EXTERIOR GRP
SURFACES
Tomaintainthefactorynewappearanceof
theboatallbreglasssurfacesshould be
cleaned regularly. Normal accumulations
ofsurfacedirtshouldberemovedbysimply
rinsingwithfreshwater.
The exterior deck surfaces should be
rinsed down with fresh water after every
trip toprevent the build-upof crystallized
salts. To remove dirt, grease and oil use
3M™ Marine Multi-Purpose Boat Soap.
Follow the manufacturer’s directions for
mixingratiosandapplicationinstructions.
Exterior breglass surfaces should be
waxed twice a year with 3M™ Marine
Protective Liquid Waxor 3M™ Marine
Ultra Performance Paste Wax to protect
againstUltraVioletdegradation(chalking)
and to maintain a deep shine on the
exposedsurfaces.Applyaccordingtothe
manufacturer’sinstructionsrecommended
foreachproduct.
Tomaintainandenhancetheshinebetween
waxapplicationsapply3M™MarineClean
and Shine Wax after each washing, this
productcanbesimplysprayedonandthen
wipedoff.
Donotapplywaxproductstotheexterior
non-skidsurfacesoftheDeck