LevelOne GES-2450 - Stp; STP Global Setting

Web Smart Switch
49
The following table describes the labels in this screen.
LABEL DESCRIPTION
Jumbo Frame
(Bytes)
Specify the maximum Jumbo Frame size in bytes from 0~9216.
Apply
Click Apply to save any changes to the switch.
3.3.9 STP
The Spanning Tree Protocol (STP) is a network protocol that ensures a loop-free topology for any
bridged Ethernet local area network.
3.3.9.1 STP Global Setting
Use the SPT Global Setting screen to activate one of the STP modes on the switch.
Click Switching > STP > STP Global Setting.