LevelOne GES-2450 - Management; Snmp; SNMP Setting

Web Smart Switch
79
The following table describes the labels in this screen.
LABEL DESCRIPTION
Priority
Select the priority value to mapping to new 802.1p, new 802.1ad and
DSCP value. The priority range is 0 to 7.
New 802.1 p
Priority
Remark to the new 802.1p priority that the priority and drop precedence
mapped to. The new 802.1p priority is 0 to 7.
New DSCP Value
Remark to the new DSCP priority that the priority and drop precedence
mapped to. The new DSCP priority is 0 to 63.
Apply
Click Apply to save your changes to the switch.
3.7 Management
3.7.1 SNMP
3.7.1.1 SNMP Setting
Click Management > SNMP->SNMP Setting to display the screen as shown next.