LevelOne GES-2450 - Telnet

Web Smart Switch
63
The following table describes the labels in this screen.
LABEL DESCRIPTION
Session Timeout
Set session timeout minutes for user access CLI from console line. If
user doesn’t response after session timeout minute, CLI will logout
automatically.
Enter a number between 0 and 1440 as the session timeout. 0 minutes
means never timeout.
Apply
Click Apply to save your changes to the Switch.
3.4.6.2 Telnet
Telnet is the TCP/IP standard protocol for remote terminal service. TELNET allows a user at one
site to interact with a remote timesharing system at another site as if the user’s keyboard and
display connected directly to the remote machine.