Type a descriptive name (up to 32 printable ASCII characters) for this
filtering rule. This is for identification only.
Click Add to add any port into the MAC filtering table.
This is the index number for the MAC filtering rules.
This field displays the MAC address that will be filtered.
This is the VLAN group to which the MAC address belongs.
This field displays the action of the filter.
This field displays the descriptive name for this rule. This is for
identification purpose only.
Click on the checkbox for the MAC filtering rule you want to delete.
3.4.3 802.1X
3.4.3.1 802.1X Setting
Use this screen to activate IEEE 802.1x security and configure RADIUS server settings.
Click Security > 802.1x > 802.1x Setting to display the configuration screen as shown