LevelOne GES-2450 - Port Rate Setting

Web Smart Switch
43
The following table describes the labels in this screen.
LABEL DESCRIPTION
Ingress Preamble
& IFG
Select the mode of ingress preamble & IFG:
 Excluded: exclude preamble & IFG (20 bytes) when count ingress
bandwidth rate.
 Included: include preamble & IFG (20 bytes) when count ingress
bandwidth rate.
Egress Preamble
& IFG
Select the mode of egress preamble & IFG:
 Excluded: exclude preamble & IFG (20 bytes) when count egress
bandwidth rate.
 Included: include preamble & IFG (20 bytes) when count egress
bandwidth rate.
Apply
Click Apply to save your changes to the switch.
3.3.6.2 Port Rate Setting
Click Switching > Bandwidth Control-> Port Rate Setting in the navigation panel to bring up the
screen as shown next.